3A3D Challenger 1/32 Duster Kit with Chassis, body mounting system, and interior. Actual production kit may vary slightly from product photo.
The kit consists of a 1/32 Duster body, chassis plate, motor pod (sidewinder), interior, front/rear windshields, and hardware (see accompanying photo). Hardware included:
4x - M2 5mm grub screws (oval point)
4x - SCC M2 x 6mm motor mount screws
4x - SCC M2 x 6mm body (machine) screws
2x - SCC 4mm motor screws
2x - JK Products #5574 3/32 single flange bushings
4x - .020" Axle shim/spacers
1x -Slotinvasion BRM and Revoslot 1/32 Guide
4x -M2 Nylock Body Mount Inserts
In addition to the items included in this kit, you will need to purchase front axle assembly, rear axle assembly, motor, and any other items required to complete the build (see list below). If you decide to finish the body and interior, you will need to provide paint, decals, etc. as well.
Parts you will need to complete the kit (not included):
2 pair BMSlot Works 15x8mm Insert Wheels (2 pairs)
1 Pair Paul Gage 22125 tires
1 Pair Paul Gage 21125 tires
1 Pair 54mm Slot.It Axles
1x - Predator S-Can motor
** IMPORTANT ** - Clearance between the "back" of the motor and the rear axle is very minimal. If you plan to use a Predator motor, you shouldn't have a problem. Other brands (e.g. Slot.It, NSR, Piranha) have a slightly larger motor can configuration. If you plan to use one of these brands, the axle may interfere or bind with the can. A potential solutions is to use a Slot.It center turned axle that has a reduced diameter along the center section.
Sidewinder gears (18mm) of your choice
6.5mm pinions of your choice
Support
Please visit the 3A3D Kit Support Page for useful information about assembling and finishing your kit.