3A3D Challenger 68 Camaro Kit with Chassis, body mounting system, and interior. Actual production kit may vary slightly from product photo.
The kit consists of a 1/32 68 Camaro body, chassis plate, motor pod (sidewinder), interior, front/rear windshields, and hardware (see accompanying photo). Hardware included:
| Qty | Item Description |
|---|---|
| 4 | M2 5mm grub screws (oval point) |
| 4 | SCC M2 x 6mm motor mount screws |
| 4 | SCC M2 x 6mm body (machine) screws |
| 2 | SCC 4mm motor screws |
| 2 | JK Products #5574 3/32 single flange bushings |
| 4 | .020" Axle shim/spacers |
| 1 | Slotinvasion BRM and Revoslot 1/32 Guide |
| 4 | M2 Nylock Body Mount Inserts |
In addition to the items included in this kit, you will need to purchase front axle assembly, rear axle assembly, motor, and any other items required to complete the build (see list below). If you decide to finish the body and interior, you will need to provide paint, decals, etc. as well.
Parts you will need to complete the kit (not included)
View the additional parts list, select your motor and gears, and purchase parts from Slot Car Corner.
Purchase Additional Parts
Opens Slot Car Corner in a new tab.
** IMPORTANT ** - Clearance between the "back" of the motor and the rear axle is very minimal. If you plan to use a Predator motor, you shouldn't have a problem. Other brands (e.g. Slot.It, NSR, Piranha) have a slightly larger motor can configuration. If you plan to use one of these brands, the axle may interfere or bind with the can. A potential solutions is to use a Slot.It center turned axle that has a reduced diameter along the center section.
Support
Please visit the 3A3D Kit Support Page for useful information about assembling and finishing your kit.